|
CNC EDM -
Drilling EDM
|
Made Young-Tech
Model YT-2535 | | POWER SUPLY | STANDARD ACCESSORIES | | | CNC | Manual | | | Maximum Average Current | 30 amps | 30 amps | Filter | 1 Pc | | Peak Current Sefection | 9 steps | 6 steps | Tool Box | 1 Set | | On-Time Range | 1-9 ms | 9 steps | Ceramic guide | 1 Pc | | Off-Time Duty Cycle | 1-9 ms | 9 steps | Electrode holder with handle | 1 Pc | | On/Off Time Duty Cycle | Digital | 2 steps | Halogen Work Lamp | 1 set | | Servo Control | 1-9 ms | VR | Rubber Chuck | 10 Pcs | | Capacitor Selections | 9 steps | 5 steps | OPTIONAL ACCESSORIES | | Voltage Selections | 3 steps | 2 steps | Digital Readout with depth control | | Power Cousumption | 3.5 KVA | 3.5 KVA | Ceramic guides Æ0.2mm~Æ3.0mm | | | Electrode Æ0.2mm~Æ3.0mm | Electrode holder w/o handle | ER Electrode holder Æ0.5mm~Æ6.0mm |
| |
EDM DRILL FEATURES: - The high pressure type working fluid delivery motor features automatic pressure release when job is finished.
- Distilled water can be used as the dielectric fluid, saving cost and conventional dielectric fluid disposal issues.
- The spindle feed is driven by a servo motor for fast motion and high accuracy positioning.
- The machine provides great drilling capacity, from 0.2 to 3.0mm. ( 0.007” to 0.118” ) in diameter.
- The ratio of machining depth to hole reaches 200:1
- The machine can use brass or copper electrodes with minimum electrode wear ratio.
- Depth preset for simple and easy operation during multi-hole drilling.
- The machine is suited for drilling write cut starting holes or other holes on the mold.
- The machine is suited for curved, spherical and irregular parts.
|
|
|
Last Updated ( Saturday, 17 November 2007 )
|
